48 volt E Bike Electric Scooter Throttle with Key 48v - 4 LED Hi End
ThrottleUSD $19.95
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Fast Scooters / Razor Scooter Upgrades
"Universal scooter Throttle" meaning you may need to change the ends and you must know your controllers wires needs on each of your wires and then match accordinly.
This here is a super nice upgrade to any 48 volt E Bike or scooter,it is easily wired to almost any scooter or ebike, make sure you check your info on your throttle and controller prior to buying.. Upgrade your throttle on any 48 volt eBike or electric scooter to a much better way to monitor your battery and keep it safe with a key!!.
This universal throttle has a Cable length of 64 inches and comes with 2.8mm male pins installed onto the 5 pins and put inside a 6 pin connector and comes with the matching end and matching female pins. Will plug into any of our 48v kits we sell.
This throttle comes with a convenient 4 LED battery level indicator(dead,25%,50%,75%,100%) and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip. We have used these on our Cruzin Coolers and they work much better than anything we have found!
Installation instructions.
Three wires (red=5V coming from controller, black=ground, green=signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and white) are a switched 48V and provide the level for the LEDs.Which would hook up to your on/off switch/power locks or whatever you use to turn it off....Verify your info before you buy.
In stock and ready to ship
"Universal scooter Throttle" meaning you may need to change the ends and you must know your controllers wires needs on each of your wires and then match accordinly.
This here is a super nice upgrade to any 48 volt E Bike or scooter,it is easily wired to almost any scooter or ebike, make sure you check your info on your throttle and controller prior to buying.. Upgrade your throttle on any 48 volt eBike or electric scooter to a much better way to monitor your battery and keep it safe with a key!!.
This universal throttle has a Cable length of 64 inches and comes with 2.8mm male pins installed onto the 5 pins and put inside a 6 pin connector and comes with the matching end and matching female pins. Will plug into any of our 48v kits we sell.
This throttle comes with a convenient 4 LED battery level indicator(dead,25%,50%,75%,100%) and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip. We have used these on our Cruzin Coolers and they work much better than anything we have found!
Installation instructions.
Three wires (red=5V coming from controller, black=ground, green=signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and white) are a switched 48V and provide the level for the LEDs.Which would hook up to your on/off switch/power locks or whatever you use to turn it off....Verify your info before you buy.
In stock and ready to ship
Price type
IN STOCK
OUT STOCK
Electric Bike Twist Throttle 36v 48v Grip Speed Display Brushless Controller Kit
By Unbranded
$27.52
.
