36 volt E Bike Electric Scooter Throttle with Key 36v - 4 LED Hi End
ThrottleUSD $21.95
Condition : New
Free Shipping
{{variant_type_name}} :
Notify me when the price drops
We will email you if we find a lower price on this product!
Fast Scooters / Razor Scooter UpgradesThis here is a super nice upgrade to any 36 volt E Bike or scooter,it is easily wired to most any scooter or ebike..
Exact Plug n play to any of our 36v variable speed kits or universal 6 pin kits Upgrade your throttle on any 36 volt eBike or electric scooter to a much better way to monitor your battery and keep it safe with a key!!.
Cable length is 64 inches, comes with 2.8mm male pins installed onto the 5 pins and put inside a 6 pin connector and comes with the matching end and matching female pins. Will plug into any of our kits we sell.
This throttle comes with a convenient 4 LED battery level indicator(dead,25%,50%,75%,100%) and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip. We have used these on our Cruzin Coolers and they work much better than anything we have found!
Installation instructions.
Three wires (red=5V coming from controller, black=ground, green=signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and white) are a switched 36V and provide the level for the LEDs.Which would hook up to your on/off switch or whatever you use to turn it off....
IN STOCK!
Exact Plug n play to any of our 36v variable speed kits or universal 6 pin kits Upgrade your throttle on any 36 volt eBike or electric scooter to a much better way to monitor your battery and keep it safe with a key!!.
Cable length is 64 inches, comes with 2.8mm male pins installed onto the 5 pins and put inside a 6 pin connector and comes with the matching end and matching female pins. Will plug into any of our kits we sell.
This throttle comes with a convenient 4 LED battery level indicator(dead,25%,50%,75%,100%) and a key switch that can be wired to your controller to prevent others from riding your bicycle or scooter without the key. Also includes with matching left side grip. We have used these on our Cruzin Coolers and they work much better than anything we have found!
Installation instructions.
Three wires (red=5V coming from controller, black=ground, green=signal back to controller) provide standard throttle function.(does not need the yellow wire hooked up as you may have had to before)
Two additional bigger wires (yellow and white) are a switched 36V and provide the level for the LEDs.Which would hook up to your on/off switch or whatever you use to turn it off....
IN STOCK!
Price type
IN STOCK
OUT STOCK
.
